Nous sommes le 28 Mar 2024, 13:33


Online     TeamSpeak UT99     UnrealTournament-V3     Download     Utfiles medor     Vote Weborama     Vote Unrealtop200     Vote xtremetop100     free TeamSpeak     Unreal Soundtracks     Google    Mini-Chat Mini-Chat

Poster un nouveau sujet Répondre au sujet  [ 4 messages ] 
 ***Tuto***Jouer sur les pug 
Auteur Message
Administrateur
Avatar de l’utilisateur

Inscription: 01 Oct 2008, 01:14
Messages: 5598
Nouveau message ***Tuto***Jouer sur les pug
Je sais plus ou j'ai piqué ça ..je crois que c'est chez RURU et ça fais des plombes que je l'ais mis de coté pour faire un tuto :)j

Alors je vais vous expliquez comment allez dessus.

1.Tout d'abord télécharger mIRC :

http://www.01net.com/windows/Internet/c ... s/295.html


2. installer le

3. lancez le et cliquez sur continue

4. remplissez les cases exmple : Fullname : "votre nom"
email adress : xxx@xxx.com
nickname: "Votrenickname"
Alternative: ne mettez rien.

5. Allez dans server qui se trouve a gauche dans la petite fenetre dans categoris-> connect-> server (c'est le deuxieme)

et ensuite cherchez quakenet clikez deux fois et clikez sur random server appuyer sur Ok.

6. Ensuite faites file ( en haut à gauche de la fentre mIRC ) et faites connect. sa va vous connectez à quakenet. Vous allez avoir une fentre qui va s'afficher avec "ENTER A CHANNEL NAME AND CLIK JOIN"

vous mettez #ugn.pug et faites .join

si vous devez quitter, inscrivez .leave ( ne le faites pas quand les capitaines ont été pris.
Nous arrivons maintenant dans une nouvelle fenêtre celle de ugn.pug

pour voir la liste des joueurs inscrit pour le prochain match faites: .list et si vous voulez jouez faites .join. Maintenant vos devez attendre qu'il y ai 10 joueurs.

Quand il ya aura 10 joueurs , des capitaines vont être choisis si vous voulez être capitaines ( je vous le déconsielles pour la premiere fois) mettez .captain. Si personnes ne s'est dévoué ils vont être pris au hazard.
Si c'est vous vous devez choisi vos joueur.
Le premier commence est le rouge je crois et il prends un joueur et il dis par exemple .pick7 ce qui signifie qui prend le 7eme joueurs de la liste.
Ensuite c'est à l'autres capitianes de choisir et il en prends 2 par exemple .pick4 .picke2

Quand ceci est fini, faites .ip pour voir sur l'ip que vous allez jouez + le mot de pass. (si le premier server est deja pris tapez .îp2 pour voir le second server) il y a aussi un server ts mais vous devez parler anglais...

Allez sur le server et allez dans votre équipe. Le capitaine va vous dire vos positions et ne les quittez surtout pas a moins qu'on vou disens d'attaquez. (O= attaque D=defence)

Et vous jouez, il y a deux map par match et trois si ya 1map chacun.

Si vous devez partir pendant le match tapez !sub peut-etre quelqu'un viendra il va demandez : "Who need a sub ?" ( qui a demandez à etre remplacé") vous dites "me" et vous quittez si il n'y a personne essayer de rester sinon partez mais sa va etre mal pris=> voir ban si un admin l'apprends

RAPPEL:
.join = joindre la liste des joueurs
.leave = quittez la liste des joueurs
.ip(2) = connaitre l'ip ou vous allez jouez
.list = voir la liste des joueurs
.stats = voir vos stats



QUELQUES REGLES:

PAS DE CHASE
PAS DE CHERYPICK ( attendre au drapeau ennemy et le prendre et se barrer. C'est pas fairplay i lfaut couvrir son potejusqu'au bout et quand i la caper vous pouvez seulement allez dans sa base)
PAs de backshoot a part si on vous en fais

Evitez de partir pendant le jeu ( sa peux dure de 30 min a 1h30)
--------------------------------------------------------------

ATTENTION LES JOUEURS QUI JOUENT LA NE SONT PAS COMME SUR TR, C EST DU VRAI CTF DONC PAS DE LAME ECT...

CE SONT DE BONS JOUEURS, FOUTEZ VOUS DE CE Qu ILS VOUS DISENT...


si vous voulez plus de précision contactez moi.

tuto by shut ;



PS: JOUEZ QUAND VOUS SAVEZ QUE VOUS AVEZ LE TEMPS ( ils y a maximum trois maps et p-e un tiebreacker)

_________________
UT99 files
Image
Image
Image
Image
Image
Image
Image


07 Mar 2010, 22:48
Profil Envoyer un e-mail
Administrateur
Avatar de l’utilisateur

Inscription: 01 Oct 2008, 01:14
Messages: 5598
Nouveau message Re: ***Tuto***Jouer sur les pug
Citation:
UT99 is still going strong, here are a few places where you can find pug's (pick-up games) to feed your UT addiction!

A PUG is like a spontaneous clanwar that anyone can take part in. You wait for 10 (or however many players are required for the mod) to sign up in the IRC channel.
Signups are usually managed by a bot in the channel. Once you have enough players, you can set Team Captains who will be able to pick teams. Then join a server and start playing.
The focus is usually on fun and teamplay, so voice communication software (Teamspeak, Ventrilo etc) are preferred and free-for-all styles of play (spawnkilling, camping etc) are frowned upon.
Please check the rules for each pug channel before adding, as they can vary!

Below i've listed some well known IRC servers where active pug channels can be found. If you have any more networks, channels, or channel info you'd like me to add, reply to this topic and ill add it to the main post.
Hopefully this will get a few more of you guys back into the pug community! See you there ;D

Here's how i've arranged the info:

#ChannelName - [Mod TeamSize] - Website
Additional Info


irc.quakenet.org
Quakenet is a predominately European network, with most ut games taking place on European servers.

#UT.pug - [nwCTF 5v5] - utpug.com
A highly active, but invite-only pug channel aimed at mid to low skilled players. Join the #UT channel and /pm LiQuidFire for an invite.

#tehpugz - [nwCTF 5v5] - http://wiggo.dk/
Another normal weapons CTF channel, this time for the high skilled players out there.

#UT.comboinsta - [comboinstagib 4v4] - utpug.com
A small pug channel dedicated to the insanely fun mod comboinsta! Public, with no skill requirement!

#ugn.pug - [saCTF 5v5] - UGN
For the sniper-whores out there! Public chan.

#spamcup - [spamCTF 4v4] - SpamCup 2011
Dedicated to the 'spam' CTF mod that uses one spammy weapon (usually rockets, flak or bio) on small CTF maps.

#project.F.R.A.G - [iTDM 2v2v2v2]
4 teams for 4 times the fun.

#Project.iCTF - [iCTF 5on5 zp]
A insta CTF pug sponsored by projectFRAG gameservers.

#zp.2on2 - [iCTF 2on2 zp]
UT iCTF zp 2on2 pickupchannel - Sponsored by ProjectFrag.

#ut1.duel - [nwDM 1v1]
Test your fragging skills against some of the best DMers around!

#Siege - [siegeXXL 5v5] - UnrealKillers
Home of the popular Siege mod on Quaknet, run by |uK| clan members.


irc.globalgamers.net
A predominately American network.

#MLUT - [nwCTF 5v5] - MLUT
General pug chan for all skill levels. Registration is required on the network to be able to join the channel.

#MLIG - [iCTF 5v5 zp]
The instagib version of #MLUT but no registration is required to join.

#PROpug - [nwCTF 5v5]
Aimed at the high skilled players. Required at least +v (voice) in the channel to join the pug.


irc.utassault.net

#utapug - [AS 6v6] - utassault.net/
Pretty much the only place left on earth to get a good game of assault.


This post assumes you know what IRC is, maybe i'll have to make a how-to post to get more of you guy on there? :lol:

_________________
UT99 files
Image
Image
Image
Image
Image
Image
Image


23 Mar 2011, 22:04
Profil Envoyer un e-mail
Administrateur
Avatar de l’utilisateur

Inscription: 01 Oct 2008, 01:14
Messages: 5598
Nouveau message Re: ***Tuto***Jouer sur les pug
Citation:
notations :
{paramètres obligatoires}
[paramètres optionnels]
sans oublier les "/" et "#".
| signifie "ou"

/ rappelle la dernière ligne entrée dans la fenêtre active.
/! rappelle la dernière ligne entrée (toutes fenêtres)
/action {texte d'action} envoie le texte d'action spécifié dans la fenêtre active (canal ou privée)
/add [-apuce] {nomdefichier.ini} charge des aliases, popups, users, commands et events.
/ame {texte d'action} envoie le texte d'action spécifié à tous les canaux où vous êtes.
/amsg {texte} envoie le message normal spécifié à tous les canaux où vous êtes.
/auser {niveau} {nick|addresse} ajoute un utilisateur avec le niveau spécifié à vos "remote users" (utilisateurs distants)
/auto [on|off|nickname|addresse] met l'autoOP on ou off pour le nick spécifié (sur les canaux où vous êtes OP ce nick sera automatiquement OPé (ou non) à son arrivée)
/away {away message} indique que vous n'êtes pas disponible pour le chat (away) et la raison. Cette info apparait alors pour tous dans votre whois.
/away Vous êtes de retour (plus marqué "away")
/ban [#channel] {nickname} Banni le nick du canal actif (ou du canal indiqué)
/beep {nombre} {intervalle} envoie le nombre de beep donné avec l'intervalle en secondes.
/channel ouvre la fenêtre de propriétés du canal où la commande est tapée
/clear efface le contenu de la fenêtre active
/clearall efface le contenu de toutes les fenêtres ouvertes.
/ctcp {nick} {ping|finger|version|time|userinfo|clientinfo} execute la requête CTCP indiquée
/closemsg {nick} ferme la fenêtre privée avec le nick donné.
/commands [on|off] marche/arrêt de la section Tools/Remote/Commands (/commands seule pour savoir si elle est on ou off)
/creq [ask | auto | ignore] choisi votre mode "On Chat request" dans "DCC/Options". (vous demander,accepter ou ignorer automatiquement les demandes de chat)
/dcc send {nick} {file1} {file2} {file3} ... {fileN} envoie les fichiers indiqués au nick (chemin complet des fichiers c:\......)
/dcc chat {nick} Envoie une demande de chat au nick
/dde [-r] {service} {topic} {item} [data] autorise le contrôle DDE entre mIRC et d'autres applications
/ddeserver [on [nomdeservice | off] marche/arrêt du service DDE (éventuellement avec son nom)
/describe {#canal} {texte d''action} Enoie le texte d'action spécifié dans le canal.
/disable {#nomdegroupe} Désactive un groupe de commandes ou d'evenements (events)
/disconnect Déconnection
/dlevel {niveau} change le niveau par défaut de votre liste d'users
/dns {nickname | IP address | IP name} Trouve l'adresse IP d'un nick
/echo [nick|#canal|status] {texte} Envoie un texte uniquemement à vous même à l'endroit et à la couleur indiqués.
/enable {#nomdegroupe} Active un groupe de commandes ou d'evenements (events)
/events [on|off] Marche arrêt de la section "events"
/exit ferme mirc
/finger envoie un finger
/flood [{nombredelignes} {secondes} {tempsdepause}] défini la protection contre le flood
/flush [niveau] supprime tous les nicks du remote users qui ne sont pas actuellement sur vos canaux.
/font ouvre la fenêtre de selection des polices de caractères
/fsend [on|off] marche/arrêt de l'envoi rapide "fast sent"
/fserve {nick} {maxgets} {répertoire} [fichier texte de bienvenue] ouvre un serveur de fichier au nick dans le répertoire indiqué sur votre disque
/groups [-e|d] montre tous les groupes de la section remote (enabled ou disabled)
/guser {niveau} {nick} [type] ajoute l'utilisateur à l'user list avec le niveau donné et le type d'adresse
/help {motclé} recherche dans l'aide de mIRC.
/ignore [on|off|nick|addresse] Marche/arret de l'ingnore pour le nick (ou son adresse) donné. Les nicks ignorés ne peuvent pas vous écrire.
/invite {nick} {#canal} inviter quelqu'un sur un canal
/join {#canal} Joindre un canal
/kick {#canal} {nick} Ejecte le nick du canal
/list [chaine] [-min #] [-max #] liste des canaux (éventuellement filtrées avec les paramètres indiqués)
/load {-apuce} {nomdefichier.ini} Charge Aliases, Popups ou Remote dans mIRC.
/log [on|off] marche arret de l'enregistrment automatique de la fenêtre active
/me {texte d'action} Envoie le texte d'action à la fenêtre active (canal ou privé)
/mode {#canal|nick} [[+|-]mode [parameters]] change les modes du canal(privé, limite,...) ou d'un utilisateurs (OP,voice,...)
/msg {nick} {message} envoie un message privé au nick sans ouvrir de fenêtre chez vous
/names {#canal} montre tous les nick du canal
/nick {nouveau nick} changer de nick
/notice {nick} {message} envoie un message "notice" au nick
/notify [on|off|nick] ajoute ou enlène un nick de votre notify liste (ou marche arrêt du notify)
/onotice [#canal] {message} envoie un messagenotice à tous les OPs du canal.
/omsg [#canal] {message} envoie un message à tous les OPs du canal.
/part {#canal} quitter le canal
/partall quitter tous les canaux.
/ping {addresse serveur} ping un serveur (pas un nick)
/play [-cpqmrlt] [canal/nick] {nomfichier.txt} [delai entre chaque ligne en secondes] Envoie le contenu d'un fichier texte à un canal ou en privé.
/pop {delai} [#canal] {nick} pour OPer avec un délai
/query {nick} {message} ouvre une fenêtre de dialogue (avec envoi d'un premier message)
/quit [raison] déconnexion
/raw {commande raw} envoie une commande RAW au serveur
/remote [on|off] montre le status des commandes remotes ou les place en marche/arret
/rlevel {niveau d'accès} enlève de la liste d'utilisateur distant tous les users d'un niveau donné
/run {c:\chemin\programme.exe} [paramètres] Execute un programme éventuellement avec des paramètres.
/ruser {nick[!]|address} [type] enlève un utilisateur de votre "remote users list".
/save [-apuce] {nomdefichier.ini} enregistre la section remote dans un fichier ini.
/say {text} parler dans la fenêtre active
/server [adresse du serveur] [port] [password]] Connexion au serveur
/sound [nick|#canal] {nomdefichier.wav} {texte d'action} joue le son en privé ou dans un canal (à l'autre bout on ne l'entend que si on a le même fichier) et envoie le texte d'action.
/sreq [ask | auto | ignore] choisi votre mode "On send request" dans "DCC/Options". (vous demander,accepter ou ignorer automatiquement les envois de fichiers)
/time renvoie l'heure du serveur
/timer[N] {répétitions} {intervalle en secondes} {commande Active un chrono.
/timestamp [on | off] affichage ou non de l'heure devant tous les messages (dans les canaux et privés)
/topic {#canal} {nouveautopic} Change le topic du canal
/ulist {niveau} liste tous les utilisateurs de votre "users list" avec le niveau indiqué
/url [-d] ouvre l'url indiquée dans votre navigateur.
/uwho [nick] ouvre la fenêtre d'information du nick spécifié.
/wavplay {c:\path\sound.wav} "joue" le fichier wav indiqué (chemin complet)
/who {#canal} renvoie la liste des nicks du canal indiqué
/who {*adresse*} montre tous les connectés de l'IRC avec une adresse correspondante (peut être une partie de l'adresse)
/whois {nick} Envoie les informations sur le nick spécifié (dans la fenêtre status avec mirc sans script)
/whowas {nick} Senvoie le "whois" de quelqu'un qui vient juste de quitter l'IRC
/write [-cidl] {nomdefichier} [texte] écrit le texte indiqué dans le fichier texte choisi.

_________________
UT99 files
Image
Image
Image
Image
Image
Image
Image


11 Avr 2011, 23:33
Profil Envoyer un e-mail
Administrateur
Avatar de l’utilisateur

Inscription: 01 Oct 2008, 01:14
Messages: 5598
Nouveau message Re: ***Tuto***Jouer sur les pug
http://www.globalunreal.com/forums/view ... f=44&t=956

Chica a écrit:
Image

Welcome private!

Image
What is the difference between a public server and a pug?
PUG stands for "Pick Up Game" which is a more organized way of playing and are higher skilled than the regular "public" servers.

Image
We play with NewNet on our servers, which is a UT mod that eliminates movement lag for any ping and makes every shot feel like it is fired straight away. NewNet makes it possible
for people to play anywhere in the world, regardless of ping or location to server. It evens the playing ground and makes this community possible.

For older players returning to UT: it feels like Zero Ping, with little to no zero ping bugs.

Image
To play a pug you will need:

    1) Image Unreal Tournament 99 (Tip: Buy the Unreal pack on Steam for $9.99)
    3) Image TeamSpeak (Download). This is used to voice chat while playing the pug.
    4) Image Preferable but not required: A microphone*

*If you do not have a microphone, you are required to add 'nomic' to the end of your name on IRC. This is to let people know you won't be using a microphone during the game.
Since in most gametypes is a team effort where good communication is crucial, it would be wise to invest a few bucks on a mic if you enjoy it and intend to stick around.

Image

Connect to IRC

After you have installed MIRC, connect to server: irc.globalgamers.net.

Then join:
#ipug (the instagib pug channel)
#upug (the weapons pug channel)
#globalunreal (the general channel)

You can do this by typing this in the command line:

/join #ipug

Or you can add them to your standard perform on connect (this means that every time you start IRC it will enter these channels).
You can do this by going to Tools -> Options -> Connect/Options -> Perform
and then the following line, seperating the channels by a comma, eg:

/join #ipug,#upug,#globalunreal

Other channels that might interest you which aren't run by Global Unreal are:
#utduel

If you want to learn how to join multiple IRC networks, view this handy guide by FALLACY.

Joining a PUG in #iPug with the PUG bot
To see what game types are available and filling, type: .list

That gives you the following list:
Image

Here you can see an overview of how many people are signed up for which gametype.
We can see that there are currently 5/10 players signed up for iCTF. Say for instance you would like to know who's signed up so far, you can also type .list <gametype>.
For example: .list ictf

Image



You see an overview of how many people out of how many needed have signed up for the different game types.

Say you feel like playing iCTF, then all you have to do is type:

.j ictf

And you will be added. It's as simple as that.
If you want to add to multiple gametypes, that's also possible (you will automatically leave the other game types as soon as one fills).

So for example ifyou want to add yourself to iCTF, iDOM and iTDM you can type:

.j ictf idom itdm

Other useful commands:
.lva - leave all gametypes
.mystats - view stats for how many games you've played etc.
.captain - set yourself as a captain (this can only be done after the pug has filled)
.liast - view the current list + last game
.last - view the last played game
.lastt - view the game prior to last
.lasttt - view two games before last

What happens when the PUG has been filled

Once a pug has been filled (i.e. all available spots have been filled), captains will be chosen to create teams*. Someone can either choose to captain by typing .captain, but if no two players step up, the bot will automatically set two players as captain.
The people who have been elected captain then type .here so that the bot knows that the captains are present. (If a captain is AFK, he will automatically be kicked by the pugbot).
The captains then take turns picking players until all players have been distributed.

*Depending on gametype. For instance, in the gametype itdm the bot automatically creates teams and for death match there are no teams.

You then have 10 minutes to join TeamSpeak and join the server.

Join TeamSpeak
Open teamspeak, connect to ts.globalunreal.com. No password is needed.
Image

Then scroll down to #iPug teams and choose the channel your team mates are in. Multiple channels exist so that multiple pugs can play simultaneously.
Say you're red, join your teammates in the red channel. If you're first in, choose the first available channel in your team colour. Not sure what colour you are? By typing .last in mirc you can see to what team you were assigned.
Image


Join the Game
This part is pretty straight forward, copy the IP address which has been suggested as IP and fire up your UT. Go to Multiplayer > Open Location and paste the IP address. Remember to also copy the password, which is normally 'pug'. Make sure there are no spaces before and after the IP adress, or you won't be able to connect. Click OK and you will enter the server.

Image

Have fun
Once in, you can join the correct team by typing (Press T in game) !blue or !red (in iTDM there is also: !green and !gold).

Blue is allowed to choose the first map and red the second. Once the team has settled on a map, you can type !v to bring up the vote menu.

Play by the rules and be sure to check out the iCTF basics and Do's and Don'ts below.



Mrgrins has also once been so kind as to make a video on how to install and connect MIRC, install TS, join your first pug, etc.

Image


Image
An informative video as how to setup your UT was once made by rootsoft:



In future we'll also be adding more tips on tweaking your ini's.

Need help getting your ut running smoothly? There's a troubleshooting forum waiting for your question.

Image
What instagib gametypes are there on #ipug?
    1) The most common gametype: Capture the Flag (iCTF)
    2) Team Deathmatch (iTDM)
    3) Domination (iDOM)
    4) Deathmatch (iDM)
    5) Multi CTF (mCTF)
    6) Teamdeathmatch War (itdmwar)
    7) Jailbreak (jb)
    8) 2 vs. 2 Team Deathmatch (2itdm)
    9) 2 vs. 2 Capture the flag (2ictf)

What else is available on #ipug?
    1) SniperCTF
    2) Shock Domination (sDOM)

Image
Do:
- Read and play by the rules
- Use comms!
- Coordinate your attacks!
- Cover the flagcarrier (iCTF)
- Try and call out enemy attackers positions for the defense! (iCTF)

Don't:
- Cheat (duh)
- Backshoot
- Chase people
- Lame
- Be racist


Image
Next to having your daily dose of pugs, we also run big tournaments every few months and also host leagues. The community is fun and the activity is off the hooks. The game, albeit old, still attracts many players from all over the world. So invite your friends, pass them this guide and start playing!

This is a preview of one of our Death Match tournaments that over 130+ people signed up for!
[youtube]http://www.youtube.com/watch?v=ini0Zfh7pVQ[/youtube]

Image



COMING SOON...

Image
We'll be adding guides to how to play iCTF (and possibly other gametypes) soon!

Image
Boosting? Cherrypicking? DMing? Soon we'll be posting an explanation of what the UT lingo means...

Community heroes....

Have you got any (CONSTRUCTIVE) tips, inis, gametype basics or experiences to share with new/returning players? Post them here.

Or are you interested in helping to make tutorial videos/guides? PM PACO, our lord and UT saviour.

_________________
UT99 files
Image
Image
Image
Image
Image
Image
Image


21 Mai 2013, 22:16
Profil Envoyer un e-mail
Afficher les messages postés depuis:  Trier par  
Poster un nouveau sujet Répondre au sujet  [ 4 messages ] 


Qui est en ligne

Utilisateurs enregistrés : Aucun utilisateur enregistré


Vous ne pouvez pas poster de nouveaux sujets
Vous ne pouvez pas répondre aux sujets
Vous ne pouvez pas éditer vos messages
Vous ne pouvez pas supprimer vos messages
Vous ne pouvez pas joindre des fichiers

Rechercher:
Aller à:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.
Traduction par: phpBB-fr.com